Braun Door 33657 Bedienungsanleitung PDF herunterladen (Seite 5)

Braun Corporation FMVSS No. 403 Quick Reference Installation Sheet 33675 Rev. A

Lift Operating Instructions

TO LOAD PASSENGER:

1. Read Notes below! Load passen-

ger onto platform, lock wheelchair

brakes and fasten handrail belt.

Note: Outer barrier must be fully

unfolded (ramp position) until the

entire wheelchair (or standee) has

crossed the outer barrier.

Note: Passenger must be

positioned fully inside yellow

boundaries.

2. Press UP switch to fold outer bar-

rier UP fully (vertical), raise the

platform to ﬂoor level and unfold

inner roll stop to ﬂoor level. Re-

lease switch.

3. Unlock wheelchair brakes and

unload passenger from platform.

TO STOW PLATFORM:

1. Fasten handrail belt.

2. Press STOW switch until platform

stops at stow level. Release

switch.

3. Unfasten handrail belt.

4. Press STOW switch until platform

stops (retracts fully). Release

switch.

CLOSE DOOR(S)

Manually close door(s) fully.

OPEN DOOR(S) AND SECURE

Manually open door(s) fully and

secure.

TO DEPLOY PLATFORM:

1. Stand clear and press the UP

switch until the platform stops (ex-

tends fully). Release switch.

2. Fasten handrail belt.

3. Press the UP switch until the plat-

form stops (raises to ﬂoor level)

and inner roll stop unfolds to ﬂoor

level. Release switch.

TO UNLOAD PASSENGER:

1. Fasten handrail belt.

2. Read Note below! Load pas-

senger onto platform and lock

wheelchair brakes.

Note: Passenger must be

positioned fully inside yellow

boundaries and outer barrier must

be UP.

3. Press DOWN switch until the entire

platform reaches ground level and

the outer barrier unfolds fully

(ramp position). Release switch.

4. Unfasten handrail belt, unlock

wheelchair brakes and unload pas-

senger from platform.

Note: Outer barrier must be fully

unfolded (ramp position) until the

entire wheelchair (or standee) has

crossed the outer barrier.

RNING

Whenever a

passenger is on the

platform, the:

• Handrail belt must

be latched

• Passenger must

be positioned

fully inside yellow

boundaries

• Wheelchair brakes

must be locked

• Inner roll stop and

outer barrier must

be up.

Failure to do so may

result in serious

bodily injury and/or

property damage.

Control Switch Functions:

UP: From the stowed position, pressing the UP

switch deploys (extends) the platform fully. The

restraint belt must then be fastened before the

platform will raise. With the belt latched, pressing

the UP switch then raises the platform to ﬂoor level

height.

From ground level, the UP function will ﬁrst au-

tomatically raise (rotate) the outer barrier to the

upright (vertical) position. The platform then raises

to ﬂoor level position. Note: The lift will not raise if

the restraint belt is not fastened or the outer barrier

is not in the UP position (built-in safety features).

DOWN: The DOWN function lowers the platform

to ground level and then unfolds the outer barrier to

the ramp (horizontal) position. Note: The handrail

belt must be latched to activate the DOWN function.

From the stowed position, the lift will extend fully

and stop. The restraint belt must then be fastened

before the platform will lower.

STOW: When the STOW switch is pressed, the

platform ﬁrst raises or lowers to stow level, starts

to retract and then stops (restraint belt must be

latched). The restraint belt must then be unfas-

tened before the platform will stow (retract) fully.

With the belt unlatched, pressing the STOW switch

then retracts the platform to the fully stowed posi-

tion. Note: The lift will not stow with weight on the

platform (built-in safety feature).

DOOR CLOSE: This function is not applicable

for “Public-Use” NUVL Lift Models (manual door

system and attendant operated lift).

Note: If any of these functions do not occur as

described, discontinue lift use immediately and

contact your sales representative or call The

Braun Corporation at 1-800-THE LIFT

. One of

our national Product Support representatives will

direct you to an authorized service repairman who

will inspect your lift.

Before lift operation, park the

vehicle on a level surface, away

from vehicular trafﬁc. Place the

vehicle transmission in “Park”

and engage the parking brake.

Open manual doors fully, being

certain the doors are secured in

the fully open position.

It is the responsibility of the lift

operator (attendant) to prop-

erly open, secure and close the

vehicle lift doors, to activate any

auxiliary interlock (if equipped),

to load and unload the wheel-

chair passenger (or standee) on

and off the lift platform, and to

properly activate all lift functions.

In event of power or equipment

failure, refer to the Manual Oper-

ating Instructions section.

Interlocking Restraint Belt: The

NUVL604XB is equipped with an

occupant restraint belt assembly

(mounted to the lift handrails).

Once the lift platform has extended

fully from the stowed position, the

belt must be latched in order to

raise or lower the platform. During

the Stow function, the belt must

be unfastened after the platform

raises or lowers to stow level and

stops. With the belt unlatched,

pressing the STOW switch then

retracts the platform fully.

Hand-held Pendant Control:

The hand-held attendent's pendant control is

equipped with four push button switches (DOOR,

STOW, DOWN and UP). The momentary switches

activate the automatic lift functions. Simply press

the switch labeled for the intended function.

When there is power to the lift, the lift function labels

illuminate to identify the functions.

DOOR STOW

DOWN UP

Hand-held Pendant Control

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Braun Door 33657 Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern