Braun Door 33657 Bedienungsanleitung PDF herunterladen (Seite 6)

Braun Corporation FMVSS No. 403 Quick Reference Installation Sheet 33675 Rev. A

Manual Operating Instructions

In event of power or equipment

failure, refer to the Manual

Operating Instructions to manu-

ally operate the lift. Refer to the

Lift Operating Instructions for all

normal lift operation procedures

(such as loading and unloading

passengers). Follow all Lift

Operation Safety Precautions

at all times!

Familiarize yourself with the

components necessary to

manually operate the lift. The

T-handle release cable re-

leases and engages the lift

platform to allow the platform

to be manually extended and

retracted. The manual back-

up pump (hand pump) is

used to manually lower and

raise the extended platform.

The location of the power

pack and release cable var-

ies from vehicle to vehicle

(depending on your particular

installation).

Note: Location of power

pack and T-handle varies.

Cable-Activated Platform Manual Release System

Platform Manual Release Sys-

tem: A cable-activated manual

release system releases and

engages the platform carriage

assembly drive chain to allow the

platform carriage assembly to be

manually moved out (extended)

or moved in (retracted) as need-

ed. A T-handle is provided on the

release cable for activation of the

manual release system (details

follow).

After manually moving the

platform in or out, it is extremely

important that the cable-acti-

vated manual release is positively

re-engaged to secure (lock) the

platform carriage assembly before

loading a passenger on the plat-

form or before driving the vehicle.

Grasp the outer barrier and move

the platform in and out until the

platform locks (chain release

assembly engages), securing the

platform carriage assembly within

the housing. You will feel the

release mechanism engage.

Failure to manually lock the plat-

form carriage assembly (re-en-

gage the carriage assembly drive

chain) after manual deployment,

will allow the platform to roll in or

out of housing unhindered during

vehicle movement. Failure to lock

the platform will also allow the

platform to roll in or out of hous-

ing unhindered during hand pump

raising and lowering procedures.

After manually releasing

platform, push manual release

T-handle in fully and ensure

platform is locked before driv-

ing lift vehicle. Uncontrolled

and unintentional platform de-

ployment (inadvertent platform

ejection) may result in serious

bodily injury and/or property

damage.

Note: The lift platform must be

pushed back into its carriage

compartment all the way before

reverting back to normal (pow-

ered) operation. When the lift is

RNING

Push T-handle in fully and

manually move platform in

and out to engage platform

lock before driving vehicle.

Failure to lock platform may

result in unintended platform

deployment. Unintended

platform deployment may

result in serious bodily injury

and/or property damage.

fully extended manually, it does

not activate the proper switches

for normal operation. Returning

(moving) the lift in fully in allows

for proper switch activation.

POWER

PACK

Hand

Pump

Handle

Valve

T-Handle

Release

Cable

Manual Operating Instructions

VALVE

OPEN

VALVE

ARN

Do not remove!

OUTER BARRIER

Detent

PLATFORM

Actuator

Hairpin

Cotter

OUT (TO EXTEND PLATFORM):

1. Pull T-Handle.

2. Turn T-Handle to lock platform in re-

leased position.

3. Pull platform out.

4. Turn T-Handle.

5. Push T-Handle in.

6. Grasp outer barrier and attempt to move

platform in and out until the platform

locks (feel release mechanism engage).

DOWN (TO LOWER PLATFORM):

Using hand pump handle, open hand pump

valve (turn counterclockwise). Open 1/2

turn only.

DOWN (TO UNFOLD OUTER BARRIER):

1. Remove hairpin cotter from detent pin.

2. Remove detent pin.

3. Unfold (rotate) barrier down.

UP (TO FOLD OUTER BARRIER):

1. Fold (rotate) barrier up.

2. Insert detent pin.

3. Insert hairpin cotter in detent pin.

UP (TO RAISE PLATFORM):

Using hand pump handle:

1. Close hand pump valve (turn clockwise).

2. Insert handle in pump and stroke.

Note: Close valve before operating

electric pump.

IN (TO STOW PLATFORM):

1. Raise or lower platform to stow level

(follow UP or DOWN procedures).

2. Pull T-Handle.

3. Turn T-Handle to lock platform in re-

leased position.

4. Push platform in.

5. Turn T-Handle.

6. Push T-Handle in.

7. Grasp outer barrier and attempt to move

platform in and out until the platform

locks (feel release mechanism engage).

RNING

Do not remove!

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Braun Door 33657 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern