Braun RA500 Bedienungsanleitung Seite 34

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 48
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 33
Page 32
Perform all procedures listed in previous section also
1 Year
or
1250
Cycles
continued
8 Weeks
or 200
Cycles
MAINTENANCE and LUBRICATION
Repeat all previously listed inspection, lubrica-
tion and maintenance procedures at 8 week or
200 cycle intervals (or per vehicle maintenance
schedule).
Consecutive
8 Week or
200 Cycle
Intervals
Clean and lubricate. Apply Door-Ease
Clean and remove debris or obstructions
Correct as needed
Blow out with air compressor
Re secure, replace defective parts or otherwise
correct as needed.
Apply Grease - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Adjust as needed
Re secure, repair or replace or otherwise cor-
rect as needed
Check to see that the ramp is securely an-
chored to the vehicle and there are no loose
bolts, broken welds, or stress fractures.
Replace decals if worn, missing or illegible.
Replace antiskid if worn or missing.
Carrier plate wear strips
Clean ramp and ramp mounting area (ensure
no debris in area to obstruct stowing )
Inspect ramp for wear, damage or any abnor-
mal condition.
Remove motor cover and clean dirt and other
foreign debris
Remove motor cover and inspect:
• Harness cables, wires, terminals and con-
nections for securement or damage
Drive gear
Motor guide rails
Manual release CAM
Drive chain
Adjust chain tension
Inspect vehicle-to-ramp wiring harness
Mounting
Antiskid
Maintenance and Lubrication Schedule (continued)
Seitenansicht 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare