Braun 6026 Bedienungsanleitung PDF herunterladen (Seite 5)

5

5. For the next measurement,

remove the used lens filter

and put on a new, clean lens

filter. Clear the display by

pushing the «start» button

once. Fit the probe snugly

into the ear canal, then push

the «start» button.

The Braun ThermoScan ear thermometer turns off

automatically after 60 seconds of inactivity.

Temperature taking hints

• A measurement taken in the right ear may differ

from the measurement taken in the left ear.

Therefore, always take the temperature in the

same ear.

• The ear must be free from obstructions or

excess earwax build-up to take an accurate

reading.

• External factors may influence ear tempera-

tures, including when an individual has:

– been lying on one ear or the other

– had their ears covered

– been exposed to very hot or very cold

temperatures, or

– been recently swimming or bathing.

In these cases, remove the individual from the

situation and wait 20 minutes prior to taking a

temperature.

• If ear drops or other ear medications have been

placed in the ear canal of one ear, take the

temperature in the untreated ear.

Care and cleaning

The probe tip is the most delicate part of the

thermometer. It has to be clean and intact to

ensure accurate readings.

If the thermometer is acciden-

tally used without a lens filter,

clean the probe tip as follows:

Very gently wipe the surface

with a cotton swab or soft cloth

moistened with alcohol.

Once the alcohol has dried completely, a new lens

filter can be put on and a temperature measure-

ment taken. If the probe tip is damaged, contact

Braun.

Use a soft, dry cloth to clean the thermometer

display and product exterior. Do not use abrasive

cleaners. Never submerge this thermometer in

water or any other liquid.

Store the thermometer and lens filters in a dry

location free from dust and contamination and

away from direct sunlight.

Additional lens filters (LF 40) are available at most

stores selling Braun ThermoScan.

Trouble-shooting

Situation Solution

No lens filter

is attached.

Attach new, clean lens

filter.

Ambient

temperature

is not within

the allowed

operating

range

(

10 – 40

°C

or

50 – 104

°F).

Allow the thermometer

to remain for 30 min-

utes in a room where

the temperature is be-

tween 10 and 40 °C

or 50 and 104 °F.

I6026223_IRT-3020_Nordic_2 Seite 5 Mittwoch, 26. Juli 2006 11:32 11

1 2 3 4 5 6 7 8 9 10 ... 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare