Braun 6 Bedienungsanleitung PDF herunterladen (Seite 19)

Page 17

Pre-Lift Operation Notes and Details

W

A

RNING

Discontinue lift use

immediately if any lift

component does not

operate properly.

Failure to do so may

result in serious

bodily injury and/or

property damage.

Folding the platform fully first will

ensure that the Lift-Tite

™

latches

will disengage properly when

the release valve is opened (in

event of platform drift). Manual

Operating Instructions are

provided on pages 32-34.

Bridge Plates and Inboard

Roll Stops: L915 Series lift

models are available with an

automatic inboard roll stop that

also serves as the bridge plate

(“IB” lift models), or a combina-

tion stationary inboard roll stop

and an independent hinged

bridge plate (“non-IB” lift

models). An “IB” lift model is

depicted in the Lift Terminology

Illustration on page 7.

Automatic Inboard Roll Stop

and Bridge Plate: L915 “IB” lift

models are equipped with an

automatic inboard roll stop that

also serves as the bridge plate

(automatic inboard roll stop

photos on page 18).

When the UNFOLD switch is

pressed and the platform unfolds

from stow position to floor level,

this mechanical roll stop/bridge

plate is automatically deployed to

the bridging (horizontal) position

to provide a bridge plate between

the platform and the lift base plate

(vehicle floor). The inboard edge

of the bridge plate rests on the lift

base plate.

The mechanical roll stop/bridge

plate automatically folds (rotates)

to the vertical (roll stop) position

when the platform lowers to the

ground (DOWN switch is

pressed).

As the UP switch is pressed and

the platform raises from ground

level, the roll stop automatically

unfolds (rotates) to the horizontal

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 44 45

Kommentare zu diesen Handbüchern

Keine Kommentare