Braun TexStyle SI 18.720 Bedienungsanleitung PDF herunterladen (Seite 9)

Caution: Hot steam comes out from the

preconditioning nozzles.

Spray function

Press the spray button (5).

Dry ironing

Set the steam regulator (6) on position «0»

(= steam off).

D Automatic shut-off

(SI 18 895 and SI 18 896 models only)

The «auto-off» mechanism causes a slight

rattling noise during ironing. This is normal

and in no case indicates a fault of the iron.

The red «auto-off» light (9) will flash when

the automatic shut-off is activated.

This happens when the iron has rested

– horizontally

on its sole plate for about

30 seconds or

– vertically on its heel rest for about

8 minutes.

To turn on the iron again, just move it.

When the «auto-off» pilot light stops

flashing, the electrical power is on again.

The automatic shut-off will be activated

approximately 2 minutes after the iron is

plugged into a socket.

E Textile Protectors

Textile Protector Plus

(11)

(only with

SI 18 896, SI 18 895 and SI 18 890

models)

The Textile Protector Plus protects

delicate fabrics from heat damage so that

you can iron most fabrics without an

intermediate cloth. A special coating

avoids shiny patches.

With the Textile Protector, you are able to

iron delicate fabrics with the temperature

setting within the solid red range so that

you can use all steam functions your iron

offers.

To check the reaction of your fabrics

before you start ironing, we recommend

that you iron a small section of material on

the reverse side. However, in order not to

damage the coating, avoid ironing over

e.g. zippers, metal buttons/rivets or strass

with the Textile Protector Plus attached.

After having attached the Textile

Protector, wait about 1 1/2 minutes before

you start ironing.

Soft Textile Protector

(12)

(only with

SI 18 896 model)

The Soft Textile Protector ensures an

increased heat protection and utmost

care for most delicate fabrics thanks to its

specially designed SoftTouch cushion.

Even most delicate, ironable* fabrics are

protected against heat damage and shiny

patches are avoided.

With the Soft Textile Protector attached,

you can iron all ironable fabrics without an

intermediate cloth. The Soft Textile

Protector is perfectly suited for touching

up e.g. creases of delicate business suits

without having to use an ironing cloth.

With the Soft Textile Protector, you are

able to iron delicate fabrics with the

temperature setting within the solid red

range so that you can use all steam

functions your iron offers.

However, in order not to damage the

SoftTouch cushion, avoid ironing over e.g.

zippers, metal buttons/rivets or strass

with the Soft Textile Protector attached.

(* in order to know whether a piece of

garment is ironable, please refer to its care

label.)

F After ironing

Unplug the iron and turn the steam

regulator to position «0». To prolong the

life of the iron, empty the water tank.

Store the cool iron in a dry place always

standing on its heel rest.

G Maintenance and cleaning

To clean the sole plate, use steel wool.

Never use a scouring pad, vinegar or other

chemicals. To clean the soft material on

the handle, use soapy water.

H Cleaning the anticalc valve

The anticalc valve located on the lower

end of the steam regulator has to be

decalcified regularly (e.g. whenever steam

development is insufficient). For this, the

water tank has to be empty.

Removing the steam regulator with the

anticalc valve

Turn the steam regulator clockwise

towards the steam setting «6». Keep

on turning firmly beyond the resistance

until the steam regulator is lifted. When

positioned at

, pull it out vertically.

Do not touch the anticalc valve at its lower

end. Immerse the anticalc valve in vinegar

(not vinegar essence) or lemon juice for

a minimum of 30 minutes. Brush off

remaining residues and rinse under

running water (fig. H, 1-7).

Re-inserting the steam regulator

When re-inserting the steam regulator,

make sure the steam regulator base still

points on setting

(fig. H, 8). Firmly push

down the steam regulator until it turns

back to setting «6» (fig. H) where it

catches.

Notice: The iron must never be used

without steam regulator.

98799847_SI18000_Korea Seite 9 Mittwoch, 1. Oktober 2008 1:36 13

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare

Braun TexStyle SI 18.720 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Eisen Braun TexStyle SI 18.720