Braun Stimuplex HNS 11 HNS 11 Bedienungsanleitung PDF herunterladen (Seite 10)

Pulse LED display

The small orange LED above the LCD display flashes according to

the pulse frequency set (1 Hz: once per second; 2 Hz: twice per

second) when current is flowing through the electrodes. At the

same time, a louder tick can be heard.

The LCD display

According to the display mode selected, the LCD display shows the

setting for, or the actually flowing stimulation current. The display

is in mA.

The

▲

symbol indicates the stimulation frequence. At the same time,

there is a ticking sound in the same stimulation frequence. A

▲

symbol appears next to the

symbol in the same stimulation

frequence when the stimulation current is flowing and the ticking

sound gets louder. When the actual value display is selected, the

LCD display additionally shows a "+" in front of the current displayed.

Exceptions:

1. Pressing the ”BAT” button displays the battery voltage.

2. Equipment-related error functions produce the corresponding

error code in the display (see p. 17).

3. The ”BAT” symbol in the display indicates that the battery must

be exchanged soon.

4. When the battery voltage drops to approx. 6 volts

appears on the display. The stimulator switches off automatically

when these signs appear.

Display:

The ”BAT” symbol indicates that the battery voltage is too low.

(Refer to the ”Battery” section, p. 13)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Keine Kommentare

Braun Stimuplex HNS 11 HNS 11 Bedienungsanleitung Seite 10