Braun Stimuplex HNS 11 HNS 11 Bedienungsanleitung PDF herunterladen (Seite 7)

Operating the nerve stimulator

Switching on / switching off

Turn the control knob clockwise out of the O position to switch on

the Stimuplex

HNS 11. A brief click signals that this has taken

place. At this instant, the device automatically starts a self-test.

This includes switching on all segments of the LCD display as a

visual check. When the self-test is completed, the nerve stimulator

immediately switches to its normal operating mode. The LEDs on

the button panel indicate the operating conditions selected (see

below). To conserve power, these extinguish after 8 seconds. They

light up again immediately when a button is pressed, but this does

not change the operating mode. The operating mode can only be

changed when the displays are lit.

To switch off the nerve stimulator, turn the control knob

anticlockwise to position O.

Selecting the pulse frequency

The selected setting is displayed and stored. You can change the

setting by pressing the "Hz" button when the LED display is lit. The

Stimuplex

HNS 11 nerve stimulator offers the facility of selecting

a frequency of 1 Hz or 2 Hz (one or two pulses per second).

Selecting the pulse width

The pulse width can be set by pressing the ”ms” button. It is possible

to set a stimulation of 0.1 ms, 0.3 ms or 1.0 ms.

The selected setting is displayed and stored. Setting can be changed

by pressing the "ms" button when the LED display is lit.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Keine Kommentare

Braun Stimuplex HNS 11 HNS 11 Bedienungsanleitung Seite 7