Braun MULTIMAG SlideScan 6000 Bedienungsanleitung PDF herunterladen (Seite 5)

ENGLISH

Installing Scanner Driver

a. Insert insert driver CD into the computer CD/DVD drive and explore the

contents.

b. Double click the ”CyberView X 5.0” icon to begin the installation process. Fol-

low the onscreen prompts to complete the installation process.

NOTE: Make sure the scanner is NOT connected to the computer during the CyberView

X 5.0 driver installation.

c. Restart computer once the installation process is complete.

Installing Hardware

a. Connect the slide scanner to a power source.

1. Locate the power switch on the lower left side of the scanner. Make sure

the scanner is TURNED OFF.

2. Plug the AC adapter into an AC power source FIRST before plugging it

into the scanner.

3. Attach the USB cable to the computer using the stadard USB adapter end.

Attach the USB adapter end of the cable to back panel of the scanner.

b. Ensure the scanner does NOT have a slide magazine loaded, turn the scanner

ON. The calibration cycle on the scanner will start automatically and will take

several minutes to complete. A green light will ash while the calibration is in

progress. The slide transport arm will move in and out of the scanner. MAKE

SURE THERE IS ENOUGH ROOM IN FRONT OF THE SCANNER FOR THE SLIDE

TRANSPORT ARM TO EXTEND FULLY, DO NOT PUSH THE ARM BACK DURING

CALIBRATION.

INSTALLING SOFTWARE AND DRIVER

for Mac (OSX) User

Before Installing the Scanner Driver...

If you choose to use the provided application for image editing, install the applica-

tion software (ex: Adobe® Photoshop® Elements) by inserting the application CD

into the computer’s CD/DVD drive. Follow the instructions that will be displayed in a

window that opens automatically.

Compact Magazine

a. As illustrated below, turn the magazine with the embossed lettering “COM-

PACT MAGAZINE 50” and the white strip on the right facing towards the top.

b. Hold the slide right side up, facing forward so the image is NOT reversed.

Rotate the slide as illustrated and Insert each slide, one at a time, into the

magazine.

Warning

: Load slides into the magazine properly and make sure the slide mounts are in good

condition. Improperly inserted slides or slides with distorted/damaged slide mounts may cause

the scanner to jam and potentially damage both the slide and the scanner.

Lettering

WhiteStrip

Compact Magazine

General Recommendations:

• Cardboard based slides should be used with the Universal Magazine DIN 108.

• Glass framed slides that are attached to glass frames may cause complica-

tions due to the hard edges.

Loading slide(s) into the magazine

1 2 3 4 5 6 7 8 9 10 ... 160 161

Kommentare zu diesen Handbüchern

Keine Kommentare

Braun MULTIMAG SlideScan 6000 Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern