Braun MULTIMAG SlideScan 6000 Bedienungsanleitung PDF herunterladen (Seite 8)

ENGLISH

One Button Scan

Open the CyberView X 5.0 driver program FIRST and press the scan button to scan

the lm or slide.

a. Open the CyberView X 5.0. (Ref. page 23 to acquire theCyberView X 5.0

driver program)

1. Select the lm type and resolution.

2. Press the scan button ( ), the scanner software will automatically display

a pop up setting window as below.

2-1. Select the Scan to directory, le format (TIF or JPG)

3. Press the scanner button (

) until you are requested to input the amount

that you want to scan to le. Release the button then select the “OK” in

the next window that appears on the screen.

3-1. If “To Host” is selected, the slide will be scanned, sending the data

to the opened application software.

3-2. If “To File” is selected, the slide will be scanned, saving the data to

the preset path.

c. Slide Viewer

The scanner has a built in mini light panel which allows the slides to be man-

ually previewed with a backlight before inserting into the tray for scanning.

Insert the slide into the slide viewer for previewing. The scanner has to be

switched on. Gently press down on the top of the slide to engage the back

light for viewing the slide.

MiniLightPanel

b. Select “Start > Programs >CyberView X 5.0_MS“ and select “CyberView X 5.0“

to open theCyberView X 5.0 application

1. Select the lm type and resolution you want to scan.

1-1. Press the scan button and it will pop-up the “Save To File“ settings

window. Input the save to path, le name and le type. (Ref. Pg.11 to

change the settings)

1-2. After setting up, click “OK“ to scan the image to le.

1-3. Press the scan button until you are requested to input the qty. that

you want to scan to le then release, then push the “OK” to get to the

next setting window.

NOTE:

If you do not open CyberViewX 5.0 FIRST, the scan button will not function.

Additional features

Manual Control Panel

a. You can advance or reverse the slide by pressing the navigation button

or and scan manually with the scan button to enable one button scan

function.

Please Note:

When installing your new scanner onto a Windows system that already has an-

other USB Flatbed scanner or All-in-one Scan/Copier/Printer device installed, it may be necessary

for you to disconnect the other scanner from the USB port for the Film scanner to work properly,

ManualControlPanel

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 160 161

Kommentare zu diesen Handbüchern

Keine Kommentare

Braun MULTIMAG SlideScan 6000 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern