Braun ThermoScan PRO 4000 Bedienungsanleitung PDF herunterladen (Seite 10)

Trouble-shooting

Error message Situation Solution

No probe cover is attached. Attach new, clean probe cover.

(flashing)

(POS = position error)

The infrared monitor cannot find

a temperature equilibrium and

allows no measurement.

Clear the display by pushing the

«Start» button once.

Ensure that the positioning of the

probe is correct and remains

stable.

Ambient temperature is not within

the allowed operating range

50–104 °F (10–40 °C) or

changing too rapidly.

Allow the thermometer to remain

for 30 minutes in a room where the

temperature is between 50 and

104 °F / 10 and 40 °C.

Temperature taken is not within

typical human temperature range

(93.2–108 °F (34–42.2 °C).

HI = too high

LO = too low

Make sure the probe tip and lens

are clean and a new, clean probe

cover is attached. Make sure the

thermometer is properly inserted

into the ear canal.

Then, take a new temperature.

System error

If error persists,

If error still persists,

Wait 1 minute until the thermo-

meter turns off automatically,

then turn on again.

... reset the thermometer by re-

moving the batteries and putting

them back in.

... contact Welch Allyn at

1-800-535-6663

(in Canada at 1-800-561-8797).

6021221_PRO4000_S4-46 Seite 10 Dienstag, 21. März 2006 10:24 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare

Braun ThermoScan PRO 4000 Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Thermometer Braun ThermoScan PRO 4000