Braun ThermoScan Pro3000 Bedienungsanleitung PDF herunterladen (Seite 10)

Care and cleaning

Braun ThermoScan probe covers are intended for single use

only! To ensure accurate readings, always use Braun

ThermoScan disposable probe covers with the Pro 3000

thermometer. Damaged, perforated, or soiled probe covers

can lead to inaccurate temperature readings. Additionally,

the accuracy of your temperature readings can be affected by

damage to the probe window, or the presence of dirt and ear

wax on the probe window.

Probe Window

To assure a high level of accuracy, it is very important to keep this

window clean, dry and undamaged. Fingerprints, earwax, dust and

other soiling compounds reduce transparency of the window and

result in lower temperature readings. If

the thermometer is

accidentally placed in the ear without a probe cover installed,

the window must be cleaned immediately. Additionally, the window

and/or probe tip area should never be modiﬁed, changed, or

adjusted. These changes will affect calibration and accuracy of

the thermometer.

o clean the window, gently wipe its surface with a cotton swab

sli

ghtly moistened with alcohol and immediately wipe dry with a

clean cotton swab. After cleaning, allow at least 5

minutes drying

time before taking temperatures. Make sure probe window is clean

and dry. Avoid touching the window except when cleaning is

required. If the window is damaged, the thermometer must be

returned to Welch Allyn for service.

Note: Do not use any chemical other than alcohol to clean

the probe window.

Thermometer

Use a soft, cloth slightly moistened with alcohol to clean the

thermometer display and exterior. Do not use abrasive cleaners.

Never submerge the thermometer in water or any other liquid.

Store thermometer and probe covers in a dry location free from dust

and contamination and away from direct sunlight. The ambient

temperature at the storage location should remain fairly constant

and within the range of 10°C - 40°C (50°F to 104°F).

6014126_WA_MN Seite 10 Montag, 12. November 2001 7:22 07

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 62 63

Keine Kommentare

Braun ThermoScan Pro3000 Bedienungsanleitung Seite 10