Braun ThermoScan Pro3000 Bedienungsanleitung PDF herunterladen (Seite 7)

3. While tugging the ear, ﬁt the probe snugly into

the ear canal as far as possible and press

the activation button.

Release it when you hear a beep.

This is the Temp Beep that conﬁrms the end

of measurement.

4. Remove the thermometer from the ear canal.

The LCD displays the temperature measured and

the probe cover symbol.

Replace the probe cover after each

measurement:

Press the ejector button and put on a new,

clean probe cover.

Only then, the probe cover symbol disappears

from the display. The thermometer is now ready

for use again.

6. If no button is pressed or no new probe cover is

attached within 30 seconds, the thermometer

will turn off automatically.

Note: In the following situations, it is recom-

mended that you take three temperatures in the

same ear. If they differ, use the highest reading.

Infants in the ﬁrst 90 days of life.

Children under three years of age who have

a condition such as a compromised immune

system and for whom the presence or

absence of fever is critical.

When you are ﬁrst learning to use the ear

thermometer until you are comfortable with

the technique and are obtaining consistent

readings.

Important: As with any type of thermometer,

slight temperature variations (± 0.2-0.3°C /

± 0.3-0.5°F) can occur, if consecutive

measurements are taken.

6014126_WA_MN Seite 7 Montag, 12. November 2001 7:22 07

1 2 3 4 5 6 7 8 9 10 11 12 ... 62 63

Keine Kommentare

Braun ThermoScan Pro3000 Bedienungsanleitung Seite 7