Braun ThermoScan Pro3000 Bedienungsanleitung PDF herunterladen (Seite 9)

Memory mode

The last temperature taken before the thermometer powers down is

stored in memory. To enter the memory mode, press the /mem

button.

The last stored temperature is displayed along with the MEM symbol.

Even in memory mode, a new temperature can be taken provided

that the ready symbol

is shown.

To quit the memory mode, press the /mem button again.

LCD light

for easy nighttime reading

Changing the temperature scale

This thermometer is shipped with the Celsius temperature scale

activated. If you wish to switch to Fahrenheit (°F), proceed as

follows:

Turn on the thermometer.

(If it is already turned on, make sure it is not in memory mode.)

Press the

/mem

button and keep it pressed. Then press and

release the activation button to switch over to the «change

temperature scale» mode.

By pressing the activation button again, the Fahrenheit scale is

activated, «°F» is displayed on the LCD. Each further pressing

of the activation button toggles the scale between °C and °F.

Release the

/mem

button to return to the ready symbol .

The temperature stored in memory will automatically be converted

to the selected scale when displayed on the LCD.

6014126_WA_MN Seite 9 Montag, 12. November 2001 7:22 07

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 62 63

Keine Kommentare

Braun ThermoScan Pro3000 Bedienungsanleitung Seite 9