Braun CareStyle 7 Pro Bedienungsanleitung PDF herunterladen (Seite 14)

Troubleshooting guide

PROBLEM CAUSE REMEDY

The appliance does not

switch on.

The appliance is not plugged

into a mains socket.

Make sure the appliance is correctly connected and press

the On/Off button.

Steam comes out under the

base unit.

The “max” pressure safety

system has opened.

Turn the appliance off immediately and contact an

authorised Braun Customer Service.

There are some water drops

from the holes in the bottom

of the soleplate.

Water has condensed inside the

tubes because steam is being

used for the first time, or has not

been used for some time.

Press the steam button several times away from the

ironing board. This will eliminate cold water from the steam

circuit.

Brown coloured fluid leaks

from the soleplate.

Chemical water softeners or

additives have been poured into

the water tank.

Never pour products into the water tank. Clean the

soleplate with a damp cloth and rinse the boiler.

The first time the appliance

is turned on, you notice

smoke or smell.

Some parts have been treated

with sealer/lubricant which

evaporates the first time the iron

heats up.

This is normal and will stop when you have used the iron a

few times. If the smoke/smell is still present after turning

off the appliance, contact an authorised Braun Customer

Service.

The appliance emits an

intermittent noise

associated with vibrations.

Water is being pumped into the

boiler.

This is normal and no action is needed.

The appliance emits a

continuous noise

associated with vibrations.

System error. Unplug the appliance from the mains and contact an

authorised Braun Customer Service.

The cleaning valve is difficult

to unscrew.

Lime scale has made the

cleaning valve difficult to open.

Turn the cap forcefully. To avoid the problem, rinse system

frequently.

After refilling the water tank,

the light

does not reset.

The water float does not work

appropriately.

Empty the water tank, rinse out and refill.

The water tank is not positioned

correctly.

Position the water tank correctly.

All LEDs are flashing. System error. Unplug the appliance, plug it in again and press On/Off

button. If this problem is still present, turn the appliance off

immediately, unplug and contact an authorised Braun

Customer Service.

Steam icon is permanently

on, but there is no steam

emission from the soleplate.

Water tank float is locked or the

water tank is not correctly

inserted.

• Turn off and unplug the appliance.

• Remove and empty the water tank, rinse out and refill.

• Insert the water tank. Switch on the appliance and wait

until the device is ready to use.

• Press the steam button and wait until steam comes out.

• Keep the steam button pressed for 10 seconds of

steam emission then release the steam button.

Subject to change without notice.

Please do not dispose the product in the household waste at the end of its useful life. Disposal can

take place at a Braun Service Centre or at appropriate collection points provided in your country

DLB245628_5712811801_Use_Instruction_IS_7043_7044_7055_7056_INT.indb 13 31.03.16 11:23

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 118 119

Kommentare zu diesen Handbüchern

Keine Kommentare

Braun CareStyle 7 Pro Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern