Braun MC 200 TYPE 4177 PLUS Bedienungsanleitung PDF herunterladen (Seite 2)

English

Read all instructions carefully before using this

product.

Important

●

the blade

is very sharp!

Take hold of the blade

by the plastic knob only. After using the blade,

always take it out of the workig bowl

first, before

removing the processed food.

●

Your voltage must correspond to the voltage printed

on the bottom of the appliance. Connect to alter-

nating current only.

●

Keep the appliance out of the reach of children.

●

This appliance was constructed for household use

only to process the listed quantities.

●

None of the parts (including the working bowl) are

microwave-proof. These parts should not be

washed in the dishwasher either.

●

Braun electric appliances meet applicable safety

standards. Repairs on electrical appliances must

only be done by authorized service personnel.

Faulty, unqualified repair work may cause accidents

or injury to the user.

●

The mains cable of this appliance can only be

changed by an official Service Dealer, since it

requires a special tool.

Specifications

●

Voltage/wattage: See typeplate on the bottom of the

appliance.

●

Opeating time and max. capacity: See processing

instructions.

This product conforms to the radio interference

supression requirements as laid down by the

Council Directive 82/499 EEC or 87/308 EEC.

Safety fuse

This unit is equipped with a self protecting system

which prevents damage to the motor in the case of

accidental overload and/or blockages. In those cases

the unit will automatically stop. Turn the appliance off

and leave for two minutes.

Afterwards, turn the appliance on again and continue

the operation. If the motor will not start, it has not

cooled off sufficiently. Turn the unit off again and wait

long enough for the motor to cool off thoroughly.

Store the appliance after use only after having turned

it off, or pull the plug out of the socket.

Description

Motor base

Switch

MC 200 only: Speed selector

Working bowl

Blade

Feed tube

Lid

Lid lock

Guide opening

Central shaft

Pusher

Slicing insert

Shredding insert

Carrier disc

a MC 200 only: Deflector

b MC 200 only: Beater disc

Cord storage compartment

Switch

0 = off

I = on

L = pulsator setting

For safety reasons, the motor turns on only if the lid

has been locked properly (see «Assembly»).

Assembly

Place the working bowl

on the central shaft

Ensure that the guide opening

on the working bowl

is aligned with the notches on the motor base. Turn the

working bowl slightly in the direction of the arrow until

it latches (A). (The lid lock

must slide into the

opening at the top of the motor base.)

●

When using the blade

: Simply place the blade

on the central shaft

and press until it rests in

place (B).

portant: Always insert blade

before putting in

food.

●

When using the slicer/shredder: Insert the cutting

insert you want (

) into the carrier disc

Insert the sharp side first; then snap the side with

the arrows in place (C).

Then place the carrier disc

on the central

shaft

(D).

MC 200 only:

●

When using the beater disc

b and deflector

Place the beater disc in the working bowl first (H)

and then push the deflector over the two notches of

the working bowl so that it fits exactly into the

grooves inside the bowl (K).

Place the lid

on the working bowl

, coupling the

lock

on the lid

with the guide rail on the motor

base

. Turn the lid clockwise until it engages onto

the motor base

with an audible click (E). For

safety reasons, the motor will only operate if the lid

has been locked properly.

Processing in the working bowl

●

Insert the food you want to process into the working

bowl only after you have inserted the blade

●

Do not exceed the maximum capacity indicated in

the tables.

Depending on what you want to process, the

ingredients can either be put directly into the work-

ing bowl

or through the feed tube

even while

the motor is running (F).

1 2 3

Multipractic 1
Multipractic 200 1

Kommentare zu diesen Handbüchern

Keine Kommentare

Braun MC 200 TYPE 4177 PLUS Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern