Braun ThermoScan IRT 3020 Bedienungsanleitung PDF herunterladen (Seite 10)

Trouble-shooting

Error message Situation Solution

No lens filter is attached. Attach new, clean lens filter.

No lens filter is attached and

activation button was pressed

while probe was in the ear.

Make sure probe tip is clean;

refer to section «Care and

cleaning» if necessary.

Attach new, clean lens filter to

stop error beeps.

Ambient temperature is not

within the allowed operating

range (10–40°C or 50 – 104 °F)

or changing too rapidly.

Allow the thermometer to remain

in a room for 30 minutes where the

temperature is between 10 and

40 °C or 50 and 104°F.

Temperature taken is not within

typical human temperature

range (34– 42.2 °C

or 93.2 –108 °F).

HI = too high

LO = too low

Make sure new, clean lens filter

is attached and thermometer is

properly inserted.

Then, take a new temperature.

System error

• If error persists,

• If error still persists,

Wait 2 minutes until thermometer

powers down, then switch on again.

… reset thermometer by removing the

batteries and putting them back in.

… have thermometer checked at a

Braun Customer Service Center

Battery is low, but thermometer

will still operate correctly.

(No light function on IRT 3520

model.)

Insert new batteries.

Battery is too low to take

correct temperature readings.

Insert new batteries.

Do you have any further

questions?

Call Braun Infoline.

6012137_neu Seite 10 Freitag, 27. Mai 2005 12:58 12

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Braun ThermoScan IRT 3020 Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Thermometer Braun ThermoScan IRT 3020