Braun ULTRA SERIES 05 L200UARS Bedienungsanleitung PDF herunterladen (Seite 18)

Page 16

Before pressing the orange

FOLD (In) switch to fold the

platform to the stowed position,

the lift operator must press the

red UP switch to be certain the

platform is in the fully raised

position. The platform must be

in the fully raised position

before the platform can be

folded.

The lift operator should continue

to press the orange FOLD (In)

switch until the actuator ratchets

(makes audible clicking) when

folding the platform to the

stowed position to ensure the

lift is fully stowed.

Bridge Plate: The bridge plate

assembly consists of the striker

back and the bridge plate flap.

The independent hinged bridge

plate flap bridges the gap

between the lift platform and the

vehicle floor when the platform

is positioned at floor level,

providing a surface for wheel-

chair (or standee) travel.

The bridge plate unfolds (ro-

tates) from the stowed position

Lift Features (continued)

L200UARS Series lifts unfold

and fold at a position above

floor level (fully raised). The lift

attendant (operator) must

position (lower or raise), and

stop the platform at vehicle floor

level when a passenger is

entering or exiting the vehicle.

The platform must be properly

positioned at a height such that

Pre-Lift Operation Notes and Details

to the bridging (horizontal)

position as the lift platform

unfolds and vice versa. The

bridge plate flap rests on the

platform when deployed

(unfolded). Read warning

posted on opposite page.

Discontinue lift operation

immediately if the bridge

plate does not operate

properly.

Striker Back Bridge Plate Flap

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 50 51

Kommentare zu diesen Handbüchern

Keine Kommentare