Braun ULTRA SERIES 05 L200UARS Bedienungsanleitung PDF herunterladen (Seite 8)

Page 6

Lift Terminology

Lift Components (continued)

details regarding the outboard roll

stop are provided in the Pre-Lift

Operation Notes section (pages

17-20).

Roll Stop Latch: The spring-

loaded latch locks the outboard

roll stop in the vertical position

when the platform raises above

ground level.

Inboard Roll Stop: L211UARS

platforms are equipped with a

fixed inboard roll stop. Attendant

operation is not required for

operation.

Manual Operation Systems:

Manual operation systems are

provided for use in event of

power or equipment failure.

L200UARS Series lifts are

equipped with an “over-center”

fold actuator manual release

system to allow the lift platform to

be manually unfolded and folded.

A manual back-up hand pump is

built into the pump module. The

lift platform can be lowered and

raised using the hand pump.

Complete details and manual

operating procedures are pro-

vided on pages 31-40.

Lift Actions and Functions

UNFOLD (Out) - Platform

Unfold: Unfold is the action of

the platform rotating out and

down from the fully-stowed

(vertical) position to the fully-

unfolded (horizontal) position

when the UNFOLD (Out) switch

is pressed.

DOWN - Platform Lower: Down

is the action of the platform

lowering when the DOWN switch

is pressed. When the platform is

unfolded from the stow position,

the platform must be lowered

from the fully-raised position to

the floor level position when

unloading a passenger at floor

level. The lift operator (atten-

dant) must stop the platform at

floor level (release DOWN

switch). The platform is then

lowered to ground level (fully-

lowered) to unload and/or load

passengers.

DOWN - Roll Stop Unfold

(Deploy): When the platform

reaches the fully-lowered (ground

level) position and the DOWN

switch is continually pressed, the

outboard roll stop rotates down

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 50 51

Kommentare zu diesen Handbüchern

Keine Kommentare