Braun Series 9 9030s Spezifikationen PDF herunterladen (Seite 16)

Trouble-Shooting

Problem: Possible reason: Remedy:

SHAVER

Shaver does not start

when pressing the

start button.

1. Travel lock is activated.

2. Wet&dry models

9095cc w&d/9040s.

This appliance can only be

operated cordlessly.

1. Press the on/off switch for 3 seconds to unlock

the shaver.

2. Unplug the shaver.

Shaver does not

charge completely

and keeps blinking.

Ambient temperature is out of

valid range.

Recommended ambient temperature for charging is

5 °C to 35 °C.

Charging does not

start when connected

to power socket or

put in Clean&Charge

Station.

1. Shaver is not placed properly

in the Clean&Charge Station.

2. Sometimes charging could

start delayed (e.g. after long

storage).

3. Ambient temperature is out

of valid range.

4. Special cord set is not

plugged in properly.

1. Contacts of shaver need to align with contacts in

the Clean&Charge Station.

2. Wait a few minutes, if charging will start auto-

matically.

3. Recommended ambient temperature for charging

is 5 °C to 35 °C.

4. Special cord set needs to snap into place.

Unpleasant smell

from the shaver head.

1. Shaver head is cleaned with

water.

2. Cleaning cartridge is in use

for more than 8 weeks.

1. When cleaning the shaver head with water only

use hot water and from time to time some liquid

soap (without abrasive substances). Remove Foil

& Cutter cassette to let it dry.

2. Change cleaning cartridge at least every 8 weeks.

Battery performance

dropped significantly.

1. Shaver head is regularly

cleaned with water but not

lubricated.

2. Foil and cutter are worn

which requires more power

for each shave.

1. If the shaver is regularly cleaned with water, apply

a drop of light machine oil on top of the foil once

a week for lubrication.

2. Replace Foil & Cutter cassette.

Shaving performance

dropped significantly.

1. Shaving system is clogged.

2. Foil and cutter are worn.

1. Soak the Foil & Cutter cassette in hot water with

a drop of dish liquid. Afterwards rinse it properly

and tap it out. Once dry apply a drop of light

machine oil on the foil.

2. Replace Foil & Cutter cassette.

Shaver turns off with

fully charged battery.

Foil and cutter are worn which

requires more power than

the motor can deliver. The

appliance turns off.

– Replace Foil & Cutter cassette.

– Regularly oil the shaving system, especially when

cleaning with water only.

Shaver head is

damp.

1. Drain of the Clean&Charge

Station is clogged.

2. Cleaning cartridge has been

used for quite a while.

1. Clean the drain with a wooden toothpick.

2. The alcohol proportion has decreased while the

oil proportion has increased. Remove residue

with a cloth.

CLEAN&CHARGE STATION

Cleaning does not

start when pressing

the start button.

1. Shaver is not placed properly

in the Clean&Charge Station.

2. Cleaning cartridge does not

contain enough cleaning fluid

(level indicator blinks red).

3. Appliance is in stand-by

mode.

1. Insert shaver into the Clean&Charge Station

(contacts of the shaver need to align with

contacts in the station).

2. Insert new cleaning cartridge.

3. Press start button again.

Increased

consumption of

cleaning fluid.

Drain of the Clean&Charge

Station is clogged.

– Clean the drain with a wooden toothpick.

– Regularly wipe the tub clean.

96630998_Series_9_MN_S6-84.indd 1696630998_Series_9_MN_S6-84.indd 16 26.02.14 08:4126.02.14 08:41

CSS APPROVED Effective Date 27Feb2014 GMT - Printed 06Aug2014 Page 16 of 84

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 80 81

Kommentare zu diesen Handbüchern

Keine Kommentare

Braun Series 9 9030s Spezifikationen Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rasierer für Männer Braun Series 9 9030s